Panneau de Dissipation Thermique pour Raspberry Pi 3 pièces

Build quality ok, nothing polished or anything, for this price, very nice, no sharp edges or anything. There should be 3 sizes to fit perfectly on raspberry pi 3. Graphics chip is bigger than small cooler, so not optimized for rasp3. But this should still be more than enough cooling, cause it will manage withouth coolers too... Recommend if you are not overclocking your device or keeping it in total closed box.

Suggestion

For graphics chip under pi, it wont be big enoug.... (the smaller one) but for this price, thats ok :)

Mar 27,2018

These adhesive-backed aluminum heatsinks are exclusively made for Raspberry Pi. They offer a significant cooling advantage over the non-cooled stock state. Better cooling means longer life span of your Raspberry Pi board and higher overclock speed. Why do you need to put heatsinks on your Raspberry Pi? ● Reduces the risk of hardware failure because of overheating ● If you are into overclocking your Pi, this is a must

Suggestion

None

Mar 06,2018

Not much to say about these heatsinks. They are really tiny, as the chips they are meant for. I plan on using them on some buck converters, but that project is still in the shipping stages of development. When I bought this set it was about 0.7 USD, if it helps anyone knowing this.

Mar 05,2019

Il processore montato sul Raspberry è il BCM2837 e da specifiche tecniche la temperatura limite di operatività è di 85°C. Anzi la scheda presenta già varie problematiche già oltre gli 80°C. Quindi se esistono casi in cui il processore rimane in attività per lunghi periodi a 87°C la situazione potrebbe essere drammatica per la vita della scheda Raspberry, e quindi sarebbe necessario montare un sistema di raffreddamento con dissipatori e ventole. Questi dissipatori svolgono egregiamente il loro compito

Suggestion

nessuno

Oct 04,2017

Super simples de usar, apenas tirar o papel e colar. Serve para outras placas como Banana Pi e Orange Pi. Muito barato. Recomendo Super simple to use, just take off paper and paste. Serves for other plates like Banana Pi and Orange Pi. Very cheap. I recommend

Suggestion

Nada ate agora. vale a pena. Nothing until now. worth it.

Apr 24,2018

I paid a great price for this set, just 0.7 USD I think a flash sale price. Two smaller pieces 9x9x5 mm and one larger piece 14x14x6 mm. 3M double sided adhesive on the back. The silver color looks nice, but I could also use some heatsinks in black.

Mar 12,2019

Dissipador básico atendendo as expectativas.These adhesive-backed aluminum heatsinks are exclusively made for Raspberry Pi. They offer a significant cooling advantage over the non-cooled stock state. Better cooling means longer life span of your Raspberry Pi board and higher overclock speed.

Suggestion

Nada

Aug 05,2018

If you are running a RaspPi, this is the recommended heatsink. I have these on all machines, and my RaspPi is used for ASD-B RX, which means it runs for 365 days. With this heatsink set, there are no heat problems at all. The price is OK and due to the adhesive tape, they are also quickly installed.

Suggestion

none

May 11,2016

Они маленькие, с обратной стороны имеют полоску двухстороннего скотча, их легко прикрепить к чему либо,неплохо охлаждают платы,но чего-то серьезного от них ждать не приходится.They are small, the back side have a strip of double-sided tape, they are easy to attach to anything, good cooling board, but something serious had to wait on them.

Suggestion

Держатся не очень хорошо,клей достаточно посредственный,но в целом за эти деньги я доволен.Hold is not good enough glue is mediocre, but overall for the money I'm satisfied.

Jan 28,2017

Disipadores pequeños para raspberry, utiles sobretodo y la placa esta bien ventilada Very good quality!! Excellent for RPi 3. easy to assemble !!!!!!!! very good thermal performance. keeps RPi cool all the time !!!!!

Suggestion

uno de ellos deberia ser un poco mas grande ya que va en la memoria que va detras de la placa y el chip es un poco mas grande que el disipador Very good quality!! Excellent for RPi 3. easy to assemble !!!!!!!! very good thermal performance. keeps RPi cool all the time !!!!!

Feb 16,2018